Safety
6
INOXPA S.A.U.
20.006.30.02EN · (0) 2021/09
The agitator and its installation can generate sound levels above 85 dB(A) under unfavourable
operating conditions. In such cases, the operators must use devices for protection against noise.
3.2.3. During maintenance
shall always be observed.
The agitator cannot operate without fluid. Standard agitators are not designed to work during the
filling or emptying of tanks.
The maximum operating conditions of the agitator should not be exceeded. Nor should the operating
parameters for which the agitator was initially designed to be modified without written authorisations
from INOXPA.
Do not leave loose parts on the floor.
Do not disassemble the agitator until the switchboard has been disconnected. Remove the fuses and
disconnect the power cable supplying the motor.
All the electric work should be carried out by specialised personnel.
