Inovonics AARON 650, Installation & User Manual

Page: 11 / 53

— 9 —
THE USER INTERFACE
Front-Panel:
A front-panel graphic display and jog
wheel allow easy, menu-guided in-situ set-
up and operation of the AARON 650. LED
“VU” meters display L/R program audio
levels.
Software Control:
The IP network port enables complete
remote setup and operation of the AARON
650 over a local network or the Internet
using any Desktop, tablet or mobile
browser.
SNMP:
SNMP remote monitoring supported.
MISCELLANEOUS
Test Tone Generator:
20Hz – 20kHz; 60dB attenuator.
AC Mains Requirements:
90–130VAC or 200–255VAC, 50/60Hz; 5W.
Size:
H: 1¾in/44mm, W: 19in/483mm,
D: 9½in/240mm (1U).
Weight:
9lb/4kg (net), 12lbs/5.4kg (shipping).
Environmental:
Continuous operation guaranteed at ambi-
ent temperatures between 32°F/0°C and
122°F/50°C; 0-95% relative humidity, non-
condensing; altitudes to 10,000ft/ 3048m.
Conformances:
EN50081-1
EN50082-1
93/68/EEC
2002/95/EC
BLOCK DIAGRAM
The AARON 650 is essentially a Software-Defined Radio (SDR) and is al-
most entirely DSP-based. Virtually all its functionality is provided through
firmware coding. The Block Diagram presented on the following page il-
lustrates receiver basics, but has been deliberately organized as if the
AARON 650 were a more conventional analog design. This should give the
reader a more familiar and understandable functional representation of
the product, although the actual signal path may deviate appreciably from
what’s shown.