3
■ Safety Precautions
1. Before installing, using, and maintaining this product, read the safety information and
precautions thoroughly, and comply with them during operations.
2. To ensure the safety of humans and products, follow the signs on the product and all the
safety instructions in this user guide.
3. The
"CAUTION", "WARNING", and "DANGER" signs are only supplements to the safety
instructions.
4. Use this product according to the designated environment requirements. Damage caused by
improper usage is not covered by warranty.
5. Inovance shall take no responsibility for any personal injuries or property damages caused
by improper usage.
■ Safety Levels and Definitions
DANGER
: The
"DANGER" sign indicates that failure to comply with the notice will result in
severe personal injuries or even death.
WARNING
： The "WARNING" sign indicates that failure to comply with the notice may result
in severe personal injuries or even death.
CAUTION
： The "CAUTION" sign indicates that failure to comply with the notice may result
in minor or moderate personal injuries or damage to the equipment.
Please keep this guide well so that it can be read when necessary and forward this guide to the
end user.
During Control System Design
WARNING
◆
Install the interlock circuits, and other circuits such as emergency stop, conventional
protection, forward and reverse running outside of this product; install devices used to
prevent equipment damage (such as up, down, and reciprocating motion limit) outside
of this product.
◆
Install the fault protection circuit outside of this product to prevent unsafe accidental
mechanical movement. If an error occurs in the input/output control area that this
product cannot detect, accidental movement may occur in the area.
◆
Design a user program to ensure the safety of the user and the system when the
product fails in display, control, communication, power supply, etc.
◆
During use, keep the charged objects away from the metal shell of the product.
