background image

 2

Preface

Introduction

The product serves as a DC uninterruptible power supply to provide continuous 

power supply upon short-term power-off for AC series controllers, AP series 

controllers, and other equipment that cannot be powered off without advanced 

plans. When the AC input is powered off, the product can provide short-term 

uninterrupted power supply through backup energy storage. This can not only 

protect the controller, but also can provide protection for data backup and 

shutdown to prevent data loss or uncontrolled actions. The product features 

compact size, high reliability, low ripple, and low interference. 

The product adopts the DIN standard guide rail installation method, and the 

lifetime of the energy storage medium is more than 10 years. The input and 

output are designed with overvoltage, overcurrent, and short circuit protection, 

as well as anti-reverse connection and EMC protection. The product has 

multiple status signal outputs and adopts dry contacts, which support two 

wiring applications including sink output and source output. The product also 

carries indicators to indicate input status, charging and discharging status, and 

faults. The screw-type power supply and I/O terminals are pluggable, which are 

convenient for maintenance. 

Audience

This guide is aimed at electrical engineers, software engineers, and system 

engineers. 

First-time Use

For the users who use this product for the first time, read the manual carefully. 

If you have any problem concerning the functions and performance, contact 

technical support personnel of Inovance to ensure correct use.

Revision History

Date

Version

Revision

May 2021

A01

Updated the product 

screenprint.

December 2020

A00

First release

Safety Instructions

Summary of Contents for GA10-UPS12

















Reviews: