InoTec SCAMAX 2600, Service Manual

Page: 27 / 68

SCAMAX
®
2600/4000
Tech. Manual 06/2002 T-27
The controller board manages all functions of the SCAMAX 2600/4000.
The scanner communicates with the scan PC via a serial interface (RS232), which controls the cameras,
motors, Dtplus boards and the endorser, according to commands received.
In addition, with the SCAMAX2600, image data from the cameras are processed for video interface (8 Bit
parallel). Binarisation, when using fixed threshold or one-dimensional automatic threshold, is executed in
the LCA’s of the controller as well.
DIL-Switches are used to set the baud rate and select the appropriate scanner type. As can be seen from
the diagram switch 1 is used to set the baud rate. It should always be set to 19200. Switches 2 to 4 are to
be set according to the table below.
DIL Switch
1 2 3 4
9600 Baud Off
19200 Baud On
SCAMAX 5000 Off Off Off
SCAMAX 2500 On Off Off
SCAMAX 4000 Off On Off
SCAMAX 2600 On On Off
1 2 3 4
ON
9600
Baud
19200
Baud