9
Connect the Enclosure to Computer for the very First Time
1. Make sure both the “Power Switch” and “Card Reader Switch” are switched to “OFF”.
2. Plug the AC adapter into the “External Power Jack” at the rear of the enclosure.
3. Attach the AC adapter to the AC power outlet.
4. Plug one end of the USB cable into the “USB 2.0 uplink port” at the rear of the enclosure.
5. Plug the other end of USB cable into computer. (Make sure the AC adapter is properly connected before connecting the
enclosure to PC.)
6. The driver for USB 2.0 Hub will be installed immediately and automatically.
7. Shift the “Card Reader Switch” to “ON”, the driver for Card Reader will be installed automatically. Two new drive icons are now
present in “My Computer”; they are the Card Readers; you can access data with these two drives (card readers) after inserting
the memory card.
8. Push the “Power Switch” to “ON”, and the driver for the drive (hard disk and optical drive) will be installed automatically. The
new drive letters are now present in “My Computer” for the connected drives.
9. All drivers are installed successfully, and you can now use the enclosure.
CF Card Slot
drive icon
5-in-1 Card Slot
drive icon
Summary of Contents for DW567
Page 1: ...USB 2 0 Dual Drives Enclosure Card Reader optional User s Manual ...
Page 2: ......
Page 16: ......
Page 17: ...7450799 00 ...