manualshive.com logo in svg

Inogen One G5, User Manual

Share
Download
Inogen One G5 User Manual Download Page 17

14

Informational Icons

The following displayed icons are not accompanied by any audible feedback or any visual 

change in the indicator lights.

Description

Display  Icons

Condition/Action/Explanation

Setting X  

Please Wait

Displayed during warm up. “X” represents the 

selected flow setting (eg., Setting 2). 

Setting X 

Battery 

Hours:Minutes

Default display when operating on battery 

power. “X” represents the selected flow  

setting (e.g., Setting 2). “HH:MM” represents  

the approximate time remaining on the  

battery charge (e.g., 1:45).

Setting X 

Battery  

Charging XX%

Default display when operating on an external 

power supply and the battery is charging. 

“xx%” represents the percent battery charge  

(e.g., 86%).

Setting X 

Battery XX%

Default display when the battery is not  

charging or when the time remaining is not 

available from the battery.

Battery  

Charging XX%

Displayed when the concentrator is plugged in 

and being used to charge a battery (not being 

used for oxygen production). It is normal to see 

a fully charged battery read between 95% and 

100% when external power is removed. This 

feature maximizes the useful life of the battery.

Sieve Reset

Displayed when column maintenance is  

required and once the replacement columns 

have been installed.

Sieve Reset 

Success

Displayed once the columns have been  

successfully reset.

Notification Icons

The Inogen One® G5 monitors various parameters during operation and utilizes an intelligent 

alert system to indicate a malfunction of the concentrator. Mathematical algorithms and time 

delays are used to reduce the probability of false alerts while still ensuring proper notification of 

an alert condition.
If multiple alert conditions are detected, the highest priority alert will be displayed.
Note that failure to respond to the cause of an alert condition for low, medium and high priority 

alerts potentially will result in discomfort or reversible minor injury only and develop within a 

period of time sufficient to switch to a backup source of oxygen.
The following notification icons are accompanied by a single, short beep.

%

HH:MM

Summary of Contents for One G5































Reviews:

No comments

Brands by name

Popular brands

Load more brands