30
9.1. Belt tension adjustment
Remove the belt shield
(Fig. 28)
and check the belt tension. To
tension the belts, loose the nut on the bolt and four bolts under the
gearbox (
Fig. 29).
Tighten the bolt for tensioning
(Fig. 30/1)
, the nut and
the bolts under gearbox. Put the belt shield back on the machine.
Appropriate belt tension is achieved when at pressing on
the belts with the force of 100 N (i.e. 10 kg), we reach a
deviation of the belt 1,5 cm.
After first two hours of work check the belt tension and if
necessary tighten the taper lock
(Fig. 27/1, 2)
!
Fig. 28
Fig. 29
Fig. 30
1
5
1
1-4
Summary of Contents for MKM
Page 33: ...33 Fig 33 Fig 34 Fig 37 Fig 38 1 Fig 34 6 Fig 35 Fig 36 Fig 38 2 5 9 4 10 7 8 3 1 2 ...
Page 38: ...38 A ...
Page 39: ...39 B ...
