28
Put the machine on the flat not soft ground. Put the support feet into
the appropriate position.
(Fig. 26).
To avoid a corrosion store the machine
on a dry place.
In the case of small place put together the arm of the mower: put away
the horisontal blockade (Fig.26/1) and push the machine to the tractor that
arm comes close to the body of the machine. Put the support feet into the
standing position and lift down the machine. Disconnect the PTO shaft
and put it on the hook (Fig.25/1). Disconnect the machine from the tractor
3-point hitch.
Fig. 25
Fig. 26
At disconnecting the machine from the tractor block the
rear roller with a piece of wood for stability of the
machine.
8.1 Cleaning
To avoid any corrosion clean the machine after each working day,
especially working tools, bearings etc. Be careful to avoid damaging
hydraulic pipes, bearings and colour.
Fig. 27
1
1
2
Summary of Contents for MKM
Page 33: ...33 Fig 33 Fig 34 Fig 37 Fig 38 1 Fig 34 6 Fig 35 Fig 36 Fig 38 2 5 9 4 10 7 8 3 1 2 ...
Page 38: ...38 A ...
Page 39: ...39 B ...
