25
8. After the job done
After the job done disconnect the PTO shaft, lift the machine and
transport it onto the appropriate place.
During transport reduce the speed, especially on bumpy
roads. The weight of the machine may render driving
difficult and damage the machine itself. During transport
the machine must be always in the central position.
Check the condition of the rotor shaft, working blades and if
they are tightened well (bolts, nuts).
PTO shaft must be disconnected during transport.
At disconnecting the machine respect the warning rules
for connecting the machine.
Put the machine on the flat not soft ground. To avoid a corrosion store
the machine on a dry place.
8.1 Cleaning
To avoid any corrosion clean the machine after each working day,
especially working tools, bearings etc. Be careful to avoid damaging
hydraulic pipes, bearings and colour.
Fig. 19
Summary of Contents for EURO MINI
Page 32: ...32 ...
