18
Fig.7
7/2 – TRANSPORT POSITION
7/1 – FLOATING (WORKING) POSITION
5.3 Fitting the PTO shaft
Attack the machine on the tractor. Split the tubes into both parts and
put one part on the tractor and another on the machine. At the machine
laying on the ground, minimum overlapping of the tubes mustn't be less
than 1/3 of total length. Cut too long part of the tube and clean the edges.
Cut on the proper length also the guard as on Fig.9. Measure the length
when the PTO shaft is in horisontal position. Grease before putting them
together.
Too long PTO shaft can seriously damage tractor or flail
mower.
Never put PTO shaft on the tractor without all guards.
2
1
2
1
Summary of Contents for EURO MINI
Page 32: ...32 ...