25
next to
Alm Setup
,
HOLD
the power-on key/function key
to enter Menu Interface 2. " * " should be at
Sounds
Setup
. Press the power-on key/function key to move " * "
to the option you desire to change.
SpO
2
Alm Hi
and
SpO
2
Alm Lo
refer to the upper and lower limit of the
SpO
2
levels that you wish the alarm to go off at
respectively.
PR Alm Hi
and
PR Alm Lo
refer to the
upper and lower limit of the Pulse Rate levels that you
wish the alarm to go off at respectively.
To increase or decrease a value, first set
+/-
to " +" or " -"
respectively. Move " * " to
+/-
.
Then
HOLD
the power-on
key/function key to set the option to + or -. While in +
mode, select the corresponding upper or lower limit
option and hold the power-on key/function key to
increase the upper or lower limit; in - mode, hold the
power-on key/function key to decrease the upper or
lower limit.
Move " * " to the
Exit
option, and hold the power-on
key/function key to return to the monitoring interface. Or
move " * " to the
Sounds Setup
option, and hold the
power-on key/function key to switch to Menu Interface 1.
