13
TROUBLESHOOTING
If you experience any problems with the unit, please take a moment to look
through this guide and see if you can solve the problem yourself before you call
your dealer.
General
No power:
• Check the connection to the AC power source. Make sure the AC source is not a
switched outlet and if it is, turn the switch on. Make sure there is power to the AC
outlet by plugging another item such as a lamp or fan.
No sound:
• Adjust the volume.
The sound has interference:
• The unit is too close to a TV set or similar appliance. Relocate the unit further away
from them, or turn the other appliances off.
Radio
Cannot listen to any station, or signal is too weak:
• Tune in the station properly.
• If a TV is near the unit, turn it off.
• Rotate the unit or antenna wire for the best reception position.
Record Player
Will not play:
• Turn the VOLUME KNOB clockwise.
• Loosen the screw and detach the stylus guard. The stylus guard is a white plastic
cover that protects the stylus during transportation. Failing to remove this guard
will not allow the needle to contact the grooves of the record and no sound will
be heard!
• If the stylus is worn-out, change the stylus. Select the correct playback speed.
Sound skips:
• Place the unit on a stable surface to avoid vibration and shock. Make sure the unit
is level both front to back and side to side.
• Clean the surface of the record/disc.
• Do not use scratched, damaged or warped records/discs.
CD Player
Will not play:
• Turn the VOLUME knob clockwise, and rotate the FUNCTION KNOB to "CD".
• Load a disc with the playback side facing down.
• If the disc is dirty, clean the surface of the disc.
• A blank disc has been loaded. Load a pre-recorded disc.
• Depending on the disc, it may not be possible to play back CD-R/CD-RW discs.
Try again with another disc.
• You cannot play back unfinalized CD-R/CD-RW discs. Finalize and try again.
Summary of Contents for ITVS-200
Page 20: ...Made in China...
