manualshive.com logo in svg

Innovaphone IP64, Product Data

Share
Download
Innovaphone IP64 Product Data Download Page 6

Product analysis: innovaphone VoIP products 2010

Copyright © 2010 by ComConsult Technologie Information GmbH

Page 2

Product range

The product range includes a manageable 
number of PBXs and terminals which never-
theless still covers the most conceivable sce-
narios in medium-sized businesses:

• 

five telephone systems (IP6000, IP2000, 
IP800, IP305, IP302),

•  one DECT base station with integrated 

PBX (IP1200),

• 

five IP telephones (IP240, IP230, IP200, 
IP150, IP110),

• one 

softphone 

(Bria)

•  four IP adapters ATA (IP28, IP24, IP22, 

IP21),

• 

five DECT telephones (IP52, IP54, IP55, 
IP56, IP64),

• one 

WLAN 

telephone 

(IP72).

The telephone systems mainly differ in the 
number of ISDN interfaces, the number of 
analogue ports and the size of the installed 
memory. The spectrum starts with 1 * BRI on 
the IP302 and goes on to include 4 * PRI on 
the IP6000. Positive: The consistent design 
concept means all systems use the same 
firmware: operation and user guidance are 

Figure 3: The innovaphone flagship, the IP6000

the same across the board. Furthermore, 
certain areas of functionality can be easily 
transferred to other systems, or taken over by 
other systems if there is a failure (see below 
for details).

Robust construction

All systems are compactly built - the largest 
PBX, the IP6000, measures just 210 x 184 x 
32 mm and weighs about 1 kg. Despite the 
small size, which reminds one of a SOHO te-
lephone system, further testing has proven 
that the innovaphone systems are clearly 
professional products for business use.

The brushed stainless steel housing is cer-
tainly attractive to look at. An optional frame 
also enables the IP6000 to be installed in a 
19” rack.

The systems have no rotating parts (e.g. fans 
or hard disks) - instead they are equipped 
with passive cooling elements and flash me-
mory. The integrated CF card slot (type I) fits 
into this concept, providing memory for voi-
cemail and announcements. The high avai-
lability of the hardware is established by the 
fact that mechanical components have been 
avoided as far as possible.

Summary of Contents for IP64
































Reviews:

No comments

Brands by name

Popular brands

Load more brands