Product analysis: innovaphone VoIP products 2010
Copyright © 2010 by ComConsult Technologie Information GmbH
Page 16
With version 8, the innovaphone PBX has a
mobility solution which enables mobile tele-
phones to be integrated into the telephone
system. These telephones can be integrated
into the PBX as subscribers and can use PBX
features. The CTI software also recognises
the mobile phone as an internal subscriber.
Mobile integration enables incoming and out-
going calls by the mobile phone to the PBX.
If the subscriber is called on his company
extension number, both his desk telephone
and his mobile telephone will ring. Out-going
external calls will show the company exten-
sion number to the party being called (one
number solution).
DTMF features on the PBX can also be used
on the mobile phone e.g. call forward, call
hold, ending active and picking up held calls,
holding active calls and picking up further
calls or toggling calls.
A further effect of mobile integration is ex-
tended cost control as calls from the mobi-
le phone are always connected through the
fixed line network.
An own GSM client is available in order to
make the mobile phone into a fully-fledged
innovaphone extension.
The GSM client only works together with the
innovaphone PBX.
Figure 16: Mobility Integration – In-coming call
Mobility
