Bedienungsanleitung
IP-Telefon IP222 / IP232
- 19 -
- 19 -
installed for headsets that need a direct connection to the telephone via DHSG (with
DHSG-USB adapter) and a second connection to the computer via USB.
Configuration
The headset is automatically recognised and configured by the telephone. A headset
icon appears in the status bar when the configuration is successful.
Accepting incoming calls
The telephone rings when there is an incoming call. If the headset supports the feature,
a signal is also heard on the headset and calling information is shown on the display.
The call can be answered by pressing the pick up call key on the headset. End the call
by pressing the same key on the headset.
Outgoing calls
A call is always prepared by dialling the number or selecting a number from one of the
phone lists. A call can be made from the headset by either pressing the redial key or the
respective key on the headset. Despite an installed headset it is still possible to set-up a
call by picking up the handset, or by pressing the speaker key in hands-free mode.
Volume control
If the headset has volume control it can be used. Volume control on the telephone
extends the settings range on the headset.
Muting
Muting can be used on both a suitable headset and on the telephone by pressing the
microphone key. Muting on the headset is not shown on the telephone display.
6.2. Direct dialling
If direct dialling is switched on, a direct dialling number is dialled after picking up the
handset or pressing the speaker key.
You can reach direct dialling in the menu over "Phone setup". Switch Direct dial on and
enter the number to be dialled.
If you have set a delay, the number or name is dialled after a pre-defined time interval
(in seconds).
Press ESC and you will be required to save your entry.
