Innovaphone IP200 Operating Manual Download Page 36

Page: 36 / 40

Operating Manual

IP Telephone IP200

- 34 -

Indirect dialling (Special menu)

The menu Indirect dialling enables quick access to various functions concerning the
following connection.

Dial the number of the subscriber in order to open the menu Indirect dialling and then

press the menu key

. The following options, explained in the chart below, will

appear on the display. Choose the desired option each with the adjacent function key

Menu Explanation

Call as User

By choosing this option, the User List is displayed and
you are able to change the telephone’s active user.

Save no. in Directory

The number dialled can be directly added to the
Telephone Directory.

Send Message

By choosing this option you are able to send a text
message to the number dialled. The message appears as
a direct message on the message recipient's display.

Dial (hands-free mode)

Select this option to start the call in hands-free mode.
Picking up the handset switches off the hands-free mode.

Number Presentation:

Choose between “On” and “Off”. This setting is only for
the following call.

Attention:
Do not pick up the handset!

Summary of Contents for IP200









































Search results

Summary of Contents for IP200

Reviews:

Related manuals for IP200

Brands by name

Popular brands

Innovaphone IP200, Operating Manual

Search results

Summary of Contents for IP200

Reviews:

Related manuals for IP200

Brands by name

Popular brands