Operating Manual
IP Telephone IP200
- 16 -
- 16 -
Key
Effect
If you have at least 2 calls in the wait list, it is possible to use this
key sequence to display all
waiting
calls in the wait list one after
the other and to select at will which call you will pick up.
This does not change the
active
call (and if applicable the
waiting/held
call).
2.9.4 Dialling a new number
Whilst connected with an
active
call partner, you can set up a new connection by calling
another subscriber.
Key
Effect
in mode 2
Press the keys in sequence during an
active
call.
The call is put
on hold.
You will hear a dial tone.
Dial the desired
telephone number and a
further connection will be set up immediately.
Call transfer:
During an
active
call
press the key to transfer the
active
call to
another subscriber. Enter the number to whom you would like to
transfer the call in the box which is now open. Pressing the
key
again will initiate the phone to ring or there will be a call waiting
indication at the selected destination.
In operating mode 1 the call
on hold
automatically becomes the
active
call after transfer.
It rings in operating mode 2. If you pick up the call manually then
you are connected to the first caller in the wait list.
2.9.5 Terminate
Press the Clearing key
to end the call with the
active
calling party on the display.
Mode 1
If the active call is terminated, you are subsequently automatically
connected with the call on hold
. The call on hold becomes the new
active
call
.
Mode 2
When you have ended the active call in this mode, the first call
waiting
in
the wait list will call you.
You can pick up the call manually. If you do not want to pick up the
call, then press the clear key
to reject it.
