Relaxxnow
27
Rotor + Grids
1. Remove and discard the plastic packaging of the motor shaft (6).
2. Guide the rear grill with the handle (5) along the motor shaft (6) against the front of the motor
unit (7). Make sure that the handle on the back of the rear grill (5) is facing up and that all the
guide pins on the motor unit (7) are aligned with the recesses on the rear grill.
3. Secure the rear gate with handle (5) with the plastic nut (4). To do this, firmly attach the plastic
nut (4) to the motor unit by tightening it clockwise
4. Guide the fan blade (3) along the motor shaft (6) against the plastic nut (4). Carefully turn the
fan blade (3) into the correct position until the recesses provided for it engage in the plastic nut
(4). Now place the turntable (2) on the motor shaft. It is fastened by tightening the turntable (2)
counterclockwise.
5. Mount the front grill (1) against the rear grill (5) by aligning the markings on the top according-
ly. Now connect both parts using the hooks on the front grill (1) and the slots on the rear grill (5).
The snap lock pin should now snap into place.
15
8
9
10
11
12
1
3
6
7
21
20
2
4 5
19
EN
