30
Relaxxnow
Operating the Remote Control
Operation is subject to the following two conditions: (1) This device does not
encounter transmission interference, and (2) this device necessarily picks up any
interference, including interference that may result in the compromised performance
of the device.
To facilitate operation, the remote control has the same buttons as the control switch.
Follow the same instructions as per the
operating instructions.
Note: Remove the plastic insulation tab under the battery before
using the remote control.
•
The remote control must be pointed at the receiver on the fan
in order to work.
• The range of the remote control is 5 meters. If the remote control is not aimed
at the receiver, the range will be reduced.
• The remote control should not be used in rooms where heavy machinery is in
operation.
• The line of sight between the remote control and the receiver must not be
blocked.
• Carefully handle the remote control. Do not drop it and
do not collide it against hard objects.
Guidelines for Using the Batteries of the Remote Control
•
If the remote control will not be used for an extended period of time, remove
the batteries from the remote control.
•
Clean the battery contacts and the device before putting the battery in the
remote control.
•
Make sure that the batteries are inserted correctly, especially with regard
to polarity, by adjusting the +/- sides of the battery to the corresponding
indicators on the remote control.
•
Remove used and damaged / discharged batteries immediately.
