7
INSTALLATION
2.4 Device preparation
The unit is supplied without accessories. The formwork for in-
stalling the unit is supplied separately for installation on site.
The metal case for housing the unit must already be pre-
pared on the wall before installing the appliance.
Installation arrangement
To install the unit, prepare the wall for housing the metal cas-
ing.
Make sure that the support wall is able to support the
weight of the appliance.
Make sure that the wall is not crossed by pipelines,
load-bearing construction elements or power lines.
L
H
P
2.5 Installation
Make sure that the support wall is suitable for weight of
the appliance.
Make sure that the wall is not crossed by pipelines,
load-bearing construction elements or power lines.
Make sure that the side connections and the condensate
drain are correctly positioned.
It is necessary, for right functioning of the device, that
during the whole installation phase the working space
remains clean.
Regularly clear away waste offcuts, debris or dirt in the
metal casing.
Box installation
The metal casing is equipped with pre-cuts in correspond-
ence with the hydraulic and electrical connections of the
appliance. Break the pre-cut necessary for through of
pipes and electric cables.
–
– insert the metal casing into the wall hole