Innova Filomuro SLW 400, Installation And User Manual, Page: 27 / 44

27
TOUCHPAD AND REMOTE CONTROL
Set the direction of the air flow
To control the air flow direction
–
press the key for about 2 seconds
The symbol lit on indicates the constant oscillation of the air flow deflector
To lock the airflow direction again
–
press again the key
The symbols goes off and the air flow deflector locks in position
Never force the flow deflector manually to move it. In cooling and dehumidification mode, the flow deflec-
tor’s position is reset every 30 minutes in order to prevent
the formation of dew.
Setting the Timer function
For setting the Timer function
–
press the key for 5 seconds
The symbol on indicates the Timer function enable
This function allows the user to freely program when to
switch the appliance on or off
To program the activation of the appliance
–
with thee display off, press the key for 5 seconds
The symbol on indicates the Timer function enable
–
select with the number of hours (from 1 to 24 h) after which the appliance will be switched on automatically
–
press again the key to confirm the setting
the display lights up in full showing the settings (setpoint, active functions, etc.) that will be activated with the automatic switching
on of the appliance
–
press again the key to confirm the setting
To program the stand-by of the appliance
–
press the key for 5 seconds
The symbol on indicates the Timer function enable
–
with the arrows select the number of hours (from 1 to 24 h) after which the appliance will be automatically turned
off
–
press again the key to confirm the setting
the display lights up in full showing the active settings (setpoint, functions, etc.)
–
press again the key to confirm the setting
Set the key lock
To set-up the key locking
–
press the key for 10 seconds
The display lights up in full showing the active settings and the key flashes with a frequency of 1 second
Any action is prevented by the user
To turn off the key-lock
–
press the key again for 10 seconds
The display lights up in full showing the active settings and the key remains fixed
Deactivate-put in stand-by the control
To deactivate or put in stand-by the control
–
press the key for about 2 seconds
The control goes out
The control panel has its own memory, therefore no set-
tings will be lost in case of shut-down or power outage
(except ventilation).
In stand-by mode, the control guarantees antifreeze pro-
tection.
If you plan to keep the device out of service for a pro-
longed time, remember to deactivate it by disconnecting
the power or removing the power plug.