Innova Filomuro SLW 400, Installation And User Manual, Page: 25 / 44

25
TOUCHPAD AND REMOTE CONTROL
Remote control
Keys and functions related.
Up key
Down key
On/off key
Not used
Key to enable cooling only mode
Not used
Key to enable ventilation only mode
Key to enable heating only mode
Night comfort key
Airflow direction control key
Fan speed control key
Key to set the Timer function
Inserting the battery
– open the slot on the bottom of the remote control
– insert the battery according to the +/- polarity
– Close the cover after inserting the battery.
Use only a dry 3 V lithium battery CR2025 (included) with
the remote control.
Used batteries must be disposed of appropriately (WEEE)
through special waste collection centres provided by the
local authorities.
General start-up
To control the device with the remote control or touch-
screen display:
– enable the main switch on the power line (the technician
who installed the device can help you locate the switch),
or introduce a power plug on the device, plugging it into
the system’s socket
After you perform these steps, you can operate the system
either by pressing the symbols on the touch-screen display
or using the remote control.
Correct use of the remote control:
• point the front of the remote towards the unit’s display,
the buzzer will emit a beep and a message will appear on
the display to confirm that the command has been ena-
bled
• the maximum range to send commands is about 8 metres
To activate the device
–
press the key
The display lights up
The preset set-point appears on the 3 digits
of the display.
3�2 Main functions
The keys of the remote control and touch-screen display
perform the same function.
Set room temperature
To set-up the temperature
–
use the keys to increase or decrease the desired value
The displayed value change
The room temperature set-point can range between 16
and 31 °C.
Do not set a temperature that is too low or too high is
harmful to health and is an unnecessary waste of energy.