manualshive.com logo in svg

Innova AirLeaf B10642, Installation Manual, Page: 20 / 40

Share
Download
Innova AirLeaf B10642 Installation Manual Download Page 20

20

S

I

U

rZ

rb

To change the volume: 

The volume changes after you confirm the modification. 

Display

Operation

- the volume setting range is from 00 (min) to 03 (max)
- Increase or decrease the volume with the icons   

Adjusting buzzer volume

To adjust the brightness:

 The brightness changes after confirming the modification.

 You can also reduce the brightness of the display through 

the control's key. From the display off, press the icon 

 for 

20 sec. The message "01" will appear. Press   to decrease 
brightness "00". Wait 30 sec. for the correct settings to be 
verified.

Display

Operation

- the brightness adjustment range is from 00 to 01
- increase and decrease the brightness with the icons   

Adjusting the brightness of the display

To change the digital input, select "di" menu:

 By default, digital input is set to CP.
 By selecting one of the other inputs (CO,CC) the 

seasonality is locked. It is not possible to modify it through 
the key 

 of the control.

 For return to the default settings, set the digital input to 

"CP".

Display

Operation

- CP / clean contact (default)
- CO / cooling open
- CC / cooling close

Settings of the digital input

Display Operation

- select "no" to keep the current settings 
- select "YS" to reset the settings

Reset modbus

Display Operation

- select "no" to disable the radiant zone
- select "YS" to enable the  radiant zone

Enable the radiant zone

 This function can only be used for wall controls 

(EDA649 - EDB649 - EWG649 - EWW649) combined 
with the EF1027 board.

 By default the radiant zones are disabled.

Summary of Contents for AirLeaf B10642









































Reviews:

No comments