19
S
I
U
6.1
Ad
uu
EN
SETTINGS MENU ECA644 - ECA647 - EWF644 - EWF647 - EDA/
EDB649 - EWG/EWW649 - E4T643
Through the remote control, the access to Setup menu will
be available from display off:
Use the icons
to move inside the menu.
Use the icon to select menu items and to confirm changes
made.
Pressing and confirming the change will switch to the next
item.
To exit from menu:
-
press the icon for 10 sec.
-
or wait 30 sec. for automatic shutdown
After 30 seconds from the last action, the control goes
off and the settings is memorised.
Setup menu
Key
Operation
Display
- press the key "ON" for 10 sec.
- the device turns on and the temperature appears
- continue to press until "Ad" appears
Menu items
Ad
Address
uu
Wifi
Ub
Adjust buzzer volume
br
Adjust the brightness
di
Digital input
rZ
Radiant zone
rb
Modbus reset
Fr
Factory reset
ot
Offset probe T
oh
Reserved
Sc
Scale
rE
Reserved
Display
Operation
- the setting range is from a minimum of 01 to a maximum of 99
- increase or decrease the number with the icons
Set the modbus address
To set the address:
Display
Operation
- select "YS" to enable the wifi
- select "rs" to reset the settings
- select "no" to disable the wifi
Enable or disable WiFi
This function can only be used for controls with
integrated wifi card (EWF644 - EWF647 - EWG649 -
EWW649)
By default, wifi is enabled.