Proper Fit:
The collar fit should be
snug, yet loose enough to allow one
finger to fit between the strap and
dog’s neck. Fit is important because a
loose collar may cause inconsistent
performance. It’s okay to trim any
excess strap length.
Step 3
Adjust the Collar
Step 2
Match Components
Step 1
Power Up
Quick Start Guide
ADV-300E, ADV-1000E & ADV-1002E
Charge the collar 12-14 hours. Be sure to cover the charge jack with the gray plug
when done. Insert batteries in the transmitter positive (+) side out.
Turning the Collar ON and OFF
Before putting collar on dog, briefly touch the two red paper dots together to turn
the collar on.
ON -
A brief, solid green light and tone indicate that the collar is on, ready to use.
A green light will blink while the collar is on.
OFF -
A brief, solid red light and tone indicate the collar has been turned off.
Remove receiver from charger. Light will flash yellow. Press button on transmit-
ter within 30 seconds. The components now work together.
1
Innotek, the Innotek logo, and Free Spirit are registered trademarks of Invisible Technologies, Inc.
All other product and service names are the property of their respective owners.
© 2003, Invisible Technologies, Inc.
All rights reserved.
2100242-2
1000 Fuller Drive, Garrett, IN, USA 46738
www.innotek.net
Euro_ADVE 9/10/04 10:27 AM Page 1