Page 8 of 12
Edition 02/25/2016
INNOTECH
EAP QUAD-11
INNO
TECH
QUADRAT-11
c) ON CORRUGATED STEEL SHEETING BEARING
SHELL
= Fastening set BEF-501
Material cross section
Corrugated steel sheeting: 0.75 mm
ATTENTION: strictly ensure that you use original
fasteners in accordance with the installation manual
included in the fastening set!
SINGLE ANCHORAGE POINT
The single anchorage point is approved for 3 people in accordance
with EN 795 A. After installation it can be rotated in all directions.
This prevents looping of the restraint cable.
Always use the single anchorage point in conjunction with a
carabiner.
INSTALLATION - SINGLE ANCHORAGE POINT
1) Screw M16 nut onto the thread and tighten.
2) Place cable eye (eyebolt) on the post and fasten with the M16
lock nut.
After fastening loosen the lock nut a quarter turn; the anchorage
point will now rotate 360° around its own axis.
3) Check: the lock nut should free approximately 2 thread turns of
the M16 threaded rod.
Attention: the single anchorage point can be plastically deformed!
