Page 6 of 12
Edition 02/25/2016
INNOTECH
EAP QUAD-11
INNO
TECH
QUADRAT-11
ALTERNATIVELY
b) SUBSTRATE: CONCRETE
and HOLLOW CORE
CONCRETE SLAB
= Fastening set BEF-103
Solid concrete: concrete quality min. C 20/25.
Hollow core slab:
concrete quality min. C 50/60 B4 and concrete thickness
of the minimum hollow-core slab cross section min.
25 mm.
Fasten with
4 x HILTI HUS3-H 8×55 5 VZ bolt anchors
Strictly follow the original instructions
(edge distances and minimum cross sections!)
provided by the dowel manufacturer!!!)
Bore depth min 60 mm with ø 8 mm
ATTENTION:
only fasten bolt anchors in structural concrete
(do not fasten in screed, levelling concrete, blinding concrete, etc.)
Ensure that the pre-stressed steel strands of the hollow-
core slab are not damaged during installation!
If in doubt contact the manufacturer and specify the type
of hollow-core slab.
