www.innosys-tech.com
1.3
Product Configuration
-
Components
: IDB-02S 1ea / Gender Board 1ea
- How to assembly:
1. Attach the SMPS and the gender board to the lighting case’s top side using bolt.
2. Connect the 4 pin cable of the SMPS to the J3 connector (CH1) of the gender board when
using 1 channel. When you are using two-channel SMPS, connect each the 4pin cable of SMPS to
the connector (CH1, CH2) each.
3. Insert the BLE dongle into the J1 connector of the gender board fixed to the Lighting.
* NOTICE: The protrusion of IDB-02S connector must be correctly aligned with the hole groove of
the gender board. Please reference to the following figures.
- Reset :
If you forget you’re the password of dongle or need to initialize it,
Press the reset button on the front of the dongle for 5 seconds.
When the reset is completed, the internal green LED flashes once.
After the reset is completed, the password is initialized to 0000
IDB-02S
Gender Board
Reset Button
5