5
INNOSILICON CONFIDENTIAL
T2T PSU
ASSEMBLY METHOD
1. Install the control board
Insert the control board along the card slot shown in Figure-6, Until the two metal buckles are right
in the two slots of control board. If you install the control board correctly, the Ethernet port will be
exactly stuck at the ETH signal of control board, as shown in Figure-7.
Figure 7
INNOSILICON CONFIDENTIAL
2. Install the connectors between PSU and control board
Connect cables 1~5 to slots 1~5 in order as shown in Figure-8, The connectors are designed with anti-
reverse connection. Please pay attention to the direction of the connectors.
Figure 8
