InnoSenT SMT mountable Series User Manual Download Page 7

  

Experience and Reliability in Radar Technology 

 

disclosed by the recipient to third parties without prior consent of InnoSenT in writing.

 

 

 

 

 

Annex A

 

The information that will be given below is only a rough overview; for details please contact the local approval 
agencies. An overview over the frequency bands in Europe can also be found in the REC 70-03 (Annex 6) which 
is available under www.efis.dk

 

 

 

Frequency Bands in Europe

 

Generally the SMR-3X4 standard version can be used for all countries in Europe.

 

 

 

24.000 

24.050 

24.150 

24.250

 

 

 

Fr

equency Bands in US 

FCC 15.249

 

 

 

24.000 

24.250

 

 

 

FCC approval

 

This device complies with Part 15 of the FCC Rules and with RSS-310 of Industry Canada. Operation is subject to 
the following two conditions:

 

(1)

 

this device may not cause harmful interference, and

 

(2)

 

this device must accept any interference received, including interference that may cause undesired 
operation.

 

 

Warning: Changes or modifications made to this equipment not expressly approved by InnoSenT GmbH may void 
the FCC authorization to operate this equipment.

 

 

Manufacturers of mobile or fixed devices incorporating SMR-3X4 modules are authorized to use the FCC Grants 
and IC Certificates of the SMR-3X4 modules for their own final products according to the conditions referenced in 
these documents. In this case, the FCC label of the module shall be visible from the outside, or the host device 
shall bear a second label stating „Contains FCC ID: UXS-SMR-3X4 “

 

 

Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio 
exempts de licence. L’exploitation est autorisée aux deux conditions suivantes:

 

(1)

 

l’appareil ne doit pas produire de brouillage, et

 

(2)

 

l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est suscep- 

tible d’en compromettre le fonctionnement.

 

 

NOTICE:

 

Changes or modifications made to this equipment not expressly approved by (manufacturer name) may void the 
FCC authorization to operate this equipment.

 

 

CONFIDENTIAL AND PROPRIETARY

 

The information contained in this document shall remain the sole and exclusive property of InnoSenT GmbH and shall not be

 

 

US-frequency

 

UK-frequency 

Europe-frequency

 

P

age 

 

U

se

r M

an

ual

 S

M

R

-314

 / 3

34

 

V

er

si

on 2

.2

 

Summary of Contents for SMT mountable Series









Reviews: