background image

Appendix A. LED Status Summary

LED / Control Blinking State

EMTA 6528-4WB State

PWR

Steady Green

Device power is on

Off

Device power is off

LAN

Blinking Amber

When Data is passed while PC is connected to LAN Ethernet 

port

Off

No PC connected to USB or LAN Ethernet ports

RECV

Steady Green

The cable modem module is locked to downstream frequency

Blinking Green

The cable modem module is searching for downstream 

frequency

Blinking Green simultaneous 

with SEND LED

The cable modem module is currently upgrading

Off

The cable modem module is not locked to downstream 

frequency

SEND

Steady Green

The cable modem module is locked to upstream frequency

Blinking Green

The cable modem module is searching for the upstream 

frequency

Blinking Green simultaneous 

with RECV LED

The cable modem module is currently upgrading

Off

The cable modem module is not locked to upstream frequency

ONLINE

Steady Green

The cable modem module has passed packet cable provision-

ing (including config file download) and is registered with the 

CMTS

Blinking Green

The cable modem module is attempting to register with CMTS

Off

The cable modem module has not passed provisioning and 

has not registered with the CMTS

PC/ACT

Solid Green

When PC is connected to LAN Ethernet port

Off

No PC connected to USB or LAN Ethernet ports

L - L

Blinking Amber

The connected telephone handset is on the hook (not in use) 

and there are new voice mail messages

Steady Amber

The connected telephone handset is off the hook

Off

The connected telephone handset is on the hook (not in use) 

and there are no new voice mail messages

Specifications

Telephone Interface

 FXS voice ports
Connector                        RJ- REN=
Signaling                          Loop start

Network Interface - Uplink

Coaxial Cable Jack
Connector                        7 W F-Type Female

Network Interface - Downlink

0/00 Base-T
Connector                         RJ-

RF Input Level

-dBmV ~ +dBmV

Frequency Range

Upstream: DOCSIS: ~Mhz
Downstream: DOCSIS: 88~860MHz

Dimension

2.4 in (H) x 10.0 in (W) x 9.0 in (D)
60 mm (H) x 255 mm (W) x 228 mm (D)

Power Supply

AC 100~240V/50~60Hz (DC 15V @ 3 Amps)

Power Consumption

Talk: DC V @  Amps (W), loop current ≤  mA/ Idle: DC V @ 0.7 Amps (8.W)

Operating Temperature

°F to 0°F  (0°C to 0°C)

Summary of Contents for EMTA 6528-4WB









Reviews: