Installation
1. Connect the active RF coaxial cable to the “CABLE” connector.
2. Connect any standard analog telephone or fax machine to EMTA’s “PHONE”
connector, labeled L1-L4.
3. Optionally, connect your PC to any LAN port using included RJ-45 cable.
4. Connect included AC power cable to the electrical outlet and its cable to the
EMTA’s “15V DC” connector.
5. Open the battery compartment and insert the battery. Put the cover back in
place.
6. Wait for “ONLINE” indicator light on front of EMTA (see Front Cover Picture)
to be steady green. If “ONLINE” light is blinking faster, 0.5 seconds ON and 0.5
seconds OFF intervals, system provisioning is in progress. Please wait until “ON-
LINE” indicator light is steady green.
7. At this point you have completed the EMTA installation. You will hear the dial
tone when you pick up the handset of the phone or fax machine. You can now
start placing and receiving telephone and fax calls.
