8
GB
• Use the appliance in a well-ventilated area. During use, the appliance must be kept at a
distance of at least 20 cm from the walls to guarantee correct operation of the air intakes.
The appliance must not be placed immediately under or behind a curtain or similar. Do not
cover the appliance with blankets or similar, during use.
• Keep ice tablets out of reach of children.
• Do not swallow the liquid contained inside the ice tablets.
• Make sure the product is switched off and unplugged before removing the grids or
proceeding with any cleaning and maintenance operations.
• Be careful when using the product because of the possible emission of hot steam.
ASSEMBLY
1. Remove the packing material carefully, taking care not to damage the plastic body of the
appliance.
2. Wheel installation. Place the wheels in the appropriate holes at the base of the device.
3. Place the device on a flat and stable surface. Keep the product away from sources of heat
or open flames.
4. Filling the water tank. Turn the tank lock lever to a horizontal position and pull the tank
towards you to partially pull it out. Insert the ice boards and fill the tank with water to obtain
an even fresher air stream. Make sure that the water level in the tank does not exceed the
MAX level indicated.
5. Replace the tank in its original position and turn the locking lever to the upright position.
6. Product must be properly assembled before being connected to the power source.
CONTROL PANEL
OFF button and ventilation speed settings
The device has three different fan speed settings: “Low”, “Mid” and “High”.
Press the “Low” key to allow the device to work at low speed.
Press the “Mid” button to allow the device to work at medium speed.
Press the “High” key to allow the device to work at maximum speed.
Press the OFF button to turn off the appliance.
Cooling Function (Cooler)
Press the “Cooler” button to activate the cooling function after adding the ice tablets in the tank.
Attention
: do not activate the cooling function if the water level in the tank is below the
minimum level indicated or there is no water in the tank.
Before activating this function, check the water level and fill the tank if necessary. Replace stale
