9
INSERTING BATTERIES
Remove the battery cover on the back side of the unit and insert the batteries, respecting
polarities shown in the compartment itself. Replace the battery cover.
Remove the batteries from the product in case of prolonged no-use.
HOW TO USE
Insert the chosen head and turn on the product with the switch selecting the speed and
direction of rotation that best suits the type of treatment to be done on your nails. This
automatically switches the LED over the head so as to facilitate the manicure.
0 = off
R1 = Low speed (clockwise rotation)
R2 = high speed (clockwise rotation)
L1 = Low speed (anti-clockwise rotation)
L2 = High speed (anti-clockwise rotation)
ATTACHMENTS
The product is equipped with 6 interchangeable heads. In order to insert the chosen at-
tachment just press downward, on the contrary to take it away pull it upwards.
Cylinder head (No. 2):
To lime and remove dead skin at nail base. It is advisable to move
the attachment with rounding movements from inside to outside.
Polishing disk (No. 3):
To polish feet and hands nails. It is advisable to place small amount
of polishing cream on the nail plate, avoiding cuticles. Select and fit polishing buffer, polish
on low speed for a maximum of 15 seconds per nail.
2 Rough modelling disks (No. 4 and 5):
To remove extensive callous areas and skin
thickening on the heels and on the foot.
Course pointed head (n.7):
For removing corns from soles.
CLEANING AND MAINTENANCE
Never immerse the main unit or the case in water or other liquids. Clean the main unit and
the outer case with a soft cloth damp with water. Always dry with care. To clean the acces-
sories: use a soft brush to remove any possible residue of skin or nails. The polishing disk and
cones can be cleaned with a soft brush damp with alcohol.
We recommend the appropriate sterilization and / or disinfection of all parts that come into
contact with the subject to be treated.
GB
