INNOLIVING INN-008, User Manual

Page: 57 / 76

57
BATTERY INSTALLATION
1. Open the battery cover and install two AAA type batteries into
the battery compartment as indicated. Make sure the polarity is
correct. See Pic. 1.
2. Close the battery compartment cover.
• Replace the batteries when the replacement indication
appears in the display or nothing after O/I button is pressed.
• Batteries included are intended to check work capacity of the
device and the life-span of the batteries can be shorter than the recommended
time.
• Do not use rechargeable batteries.
• Only the same types of batteries are allowed to be used together.
Replace all batteries simultaneously.
• If the device is to be unused for a long time, please take out the batteries.
• Don’t leave the worn batteries in the device.
CORRECT POSTURE FOR MEASUREMENT
Sit at the table and let the table support your arm as you
take the measurement. See Pic. 2. Wrap the cuff around the
left wrist as shown in the illustration, and make sure that the
wrist cuff is attached to the wrist securely with display facing
the user. If your sleeve restricts blood circulation of your wrist
or you roll your sleeve up so as to result in such restriction.
Please take off your clothes to get accurate measurement if
necessary. If measurement on your left wrist is difficult, you
can use right wrist for measurement.
Pic.1
Pic.2
GB