It is a statutory requirement that the Control Unit is installed by an authorized
electrician. The power to the cooker must be disconnected throughout the entire
installation.
Disconnect the power
Switch off the power at the
consumer unit.
Note!
Do not turn on the
Consumer unit before the Heat
Sensor is set and ready for a
function test.
Connect to the Control Unit
• Unplug the cooker.
• Connect the cooker to the Control Unit.
• Plug the input cord of the Control Unit
to the cooker wall outlet.
CONTROL UNIT
1
I N S T A L L A T I O N
POWER
OFF
2
12
Summary of Contents for SGC430-1U3-50
Page 14: ...2 USER GUIDE...
