SATADOM-MV 3ME3
7
Rev. 1.0 TPS, September, 2015
1. Product Overview
1.1 Introduction of Innodisk SATADOM-MV 3ME3
Innodisk Serial ATA Disk on Module (SATADOM) supports SATA III standard (6.0Gb/s) interface with excellent
performance, and SATADOM-MV 3ME3 is designed as the smallest form factor size that could enhance
compatibility with various design applications. Particularly the 7th pin of standard SATA 7pin connector can
optionally be the built-in power VCC pin. In other words, it could be connected directly to the SATA on-board
socket on customers’ system without additional power cable. Besides, the booting time for operation and the
power consumption is less than hard disk drive (HDD), and can work under harsh environment compile with
ATA protocol, no additional drives are required, and the SSD can be configured as a boot device or data
storage device.
1.2 Product View and Models
Innodisk SATADOM-MV 3ME3 is available in follow capacities within MLC flash ICs.
SATADOM-MV 3ME3 08GB
SATADOM-MV 3ME3 16GB
SATADOM-MV 3ME3 32GB
SATADOM-MV 3ME3 64GB
SATADOM-MV 3ME3 128GB
Figure 1: Innodisk SATADOM-MV 3ME3
1.3 SATA Interface
Innodisk SATADOM-MV 3ME3 supports SATA III interface, and compliant with SATA I and SATA II.
