Innodisk SATADOM-MV 3ME3 08GB, Manual

Page: 10 / 22

SATADOM-MV 3ME3
10 Rev. 1.0 TPS, September, 2015
2.5 CE and FCC Compatibility
SATADOM-MV 3ME3 conforms to CE and FCC requirements.
2.6 RoHS Compliance
SATADOM-MV 3ME3 is fully compliant with RoHS directive.
2.7 Reliability
Parameter Value
Read Cycles Unlimited Read Cycles
Wear-Leveling Algorithm Support
Bad Blocks Management Support
Error Correct Code Support
iData Guard Support
Thermal Sensor WT only
TBW* (Total Bytes Written) Unit: TB
8GB 2.32
16GB 4.64
32GB 9.28
64GB 18.56
128GB 37.12
* Total bytes written is based on JEDEC 218 (Solid-State Drive
Requirements and Endurance Test Method)
** Lifespan is calculated by device written per day
2.8 Transfer Mode
SATADOM-MV 3ME3 support following transfer mode:
Serial ATA I 1.5Gbps
Serial ATA II 3.0Gbps
Serial ATA III 6.0Gbps
2.9 Pin Assignment
Innodisk SATADOM-MV 3ME3 uses a standard SATA pin-out. See Table 8 for SATADOM-MV 3ME3 pin
assignment.