SATADOM-MV 3ME3
17
Rev. 1.0 TPS, September, 2015
pin 7, external power must be provided to the SATADOM from the 2pin connector on the side.
To have the advantages of SATADOM-MV 3ME3 series with Pin7 VCC, and to avoid any potential damage to
customers’ board designed with VCC power supply, InnoDisk suggests that customers MUST design their
board with a fuse which should be designed before the SATA socket Pin7 VCC. In other words, customers are
suggested NOT TO layout 5V VCC to SATA socket on board directly. A circuit diagram example to explain this
is shown as below.
4.5 Power cable
A power cable is shipped with each SATADOM product, which has standard 4pins power
connector and special 3 pins power connector for SATADOM. The male and female power
connector of SATADOM have foolproof design to avoid misconnection, please check it before
power on.
* PN end with F is SATADOM Pin 7 with power supply version, which doesn’t
provide power cable.
