4.
I
NNOBAND
S
ETUP
W
IZARD
An Innoband 8012-G1 hosts an internal Web server that has a tool to configure the device
according to the information provided by your ISP. The System Configuration tool is available for
checking the system configuration, password, statistics, and for software upgrades. To use it, a
Web browser such as Internet Explorer or Netscape Navigator/Communicator is required on your
PC.
Default setting values pre-configured by the manufacturer are VPI = 0, VCI = 35, Encapsulation
Mode = RFC 1483 Bridged, and LAN IP = 192.168.1.1. Do not change the default values, unless
specifically instructed by your DSL service provider. If your service provider did not ask you to
check the system configuration, do not proceed further or do not alter the default values.
This chapter is organized as follows:
o
Opening Innoband’s Configuration Page
o
Using the Status Option
Innoband Setup Wizard
33
