Inno media InfoTalk 7, Operating Manual

Page: 22 / 58

1 6
ADVANCED SETTINGS
Aside from the Basic Settings listed in Chapter 1 - User Quick Start Guide, that
are required for InfoTalk to function nominally, other feature settings found in
this chapter, help to fine tune the device and provide you with the control of
activating selected features.
I SYSTEM SETTINGS
To access device’s
System Settings
1. Press at the default screen.
2. Press or to scroll the menu to System Settings, then press .
3. Options available for setting: Restore Factory Default, Dial Mode, Dialing
Prefix, Country, Connection Tone, Language.
Factory Default
- Each InfoTalk comes with a default system setting listed below,
but you can select your preferred settings.
Dial Mode >> Tone Dialing
Dialling Prefix >> ATDT
Country >> Others
Connection Tone >> Tone 2 at Medium Volume
Language >> English
Dial Mode
- InfoTalk 7 can support either tone dialing or pulse dialing telephones,
check your phone dial mode before making your selection.
Dialing Prefix
- The default dialing prefix is ATDT. However, you might need to
set a different prefix to accommodate the local phone line requirement.
To set
Dialing Prefix
1. Under System Settings, scroll to Dialing Prefix and press .
2. Delete the default setting using * of phone keypad and enter the required
prefix.
3. If you are using a PABX line, you may need to dial a 7 or 9 after the prefix
in order to make an external call
Example: ATDT7, or ATDT9, or ATX3DT7
∂
For overview of the
fields in each sub-
menu, please refer to
“InfoTalk 7 Navigation
Menu” within this
chapter
u
Diagram of
phone keypad