Inno media InfoTalk 7, Operating Manual

Page: 17 / 58

1 1
I T E M S F U N C T I O N D E S C R I P T I O N S
1. Power switch Flip the switch down to turn ON InfoTalk.
2. Power input DC 12V input power for InfoTalk.
3. Audio output Insert RCA cable for audio output through headset
or speakers.
4. LINE RJ11 Socket for connection of InfoTalk to the wall socket
(RJ11 connector)
5. PHONE RJ11 Socket for connection of InfoTalk to the phone socket
(RJ11 connector)
6. 9-pin serial port Female 9-pin connector for serial connection to PC
or communication device.
IV INSTALLATION
1. Disconnect the phone cord
from phone and connect it to
the back panel
socket labeled
2. Take the phone cord provided,
connect it to your phone and
insert the other end into
the back panel
socket labeled
3. Connect the power adapter to
InfoTalk power input labeled
DC 12V and turn on the power
on your wall socket.
4. Power up your InfoTalk unit by flipping
down the switch.
5. You will see the default screen
as illustrated to the right.
1 2 3 4 5 6
Diagram of InfoTalk setup
III REAR PANEL