8
Connecting the PC
You require:
•
The home gateway unit
•
Ethernet RJ-45 UTP cable
1. Plug one end of the Ethernet cable to one of the two ports on the home gateway as
shown in the picture (
LAN 1
or/and
2
).
Note: The ports can be pre-configured for specific service - data (PC) or video
(TV). You will obtain this information from your service provider, than plug
your device to the designated port accordingly.
2. Plug the other end of the Ethernet cable to the Ethernet port on your PC.
When the home gateway is turned on and your PC connected, observe the corresponding
LAN
light indicator. The light is on uninterruptedly or occasionally blinks.
