background image

DAT104 Operation Manual  -  V1.0  12/1/00 

 

© 2000  -  INLINE, Inc. 

Compatibility 

 

INPUT 

 
The DAT104 will accept a single link TMDS signals with at resolutions up to 1280 x 1024 
(SXGA).  The unit accepts the signal on a 20-pin DFP connector.  The DAT104 will also accept 
single link TMDS based signals from DVI ports when used with the appropriate video adapter  
cable (see the list on page 6). 
 

OUTPUT 

 
Featuring four (4) independently buffered DFP (MDR20) video output ports, the DAT104 can 
drive up to four display devices simultaneously.  The output signals are compatible with flat panel 
displays, plasma monitors, LCD projectors and other display devices that accept digital video 
signals. 

 

Due to the nature of TMDS signaling, all display devices connected 
to the DAT104 must have the same native resolution.
  Output 1 
provides an EDID data link between the local display device and the 
computer’s video graphics card.  The computer graphics card senses 
the native or optimal resolution of the data display connected to Output 
1 and configures the video signal to the ideal resolution for that 
display.  If the displays connected to Outputs 2, 3 and 4 on the 
DAT104 have a different native resolution than the display connected 
to Output 1,  they will not operate properly. 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

 

Summary of Contents for DAT104











Reviews: