8
DAT104 Operation Manual - V1.0 12/1/00
© 2000 - INLINE, Inc.
Warranty
♦
INLINE warrants the equipment it manufactures to be free from defects in materials and
workmanship.
♦
If equipment fails because of such defects and INLINE is notified within two (2) years
from the date of shipment, INLINE will, at its option, repair or replace the equipment at
its plant, provided that the equipment has not been subjected to mechanical, electrical, or
other abuse or modifications.
♦
Equipment that fails under conditions other than those covered will be repaired at the
current price of parts and labor in effect at the time of repair. Such repairs are warranted
for ninety (90) days from the day of re-shipment to the buyer.
♦
This warranty is in lieu of all other warranties expressed or implied, including without
limitation, any implied warranty or merchantability or fitness for any particular purpose,
all of which are expressly disclaimed.
The information in this manual has been carefully checked and is believed to be accurate. However,
INLINE, Inc. assumes no responsibility for any inaccuracies that may be contained in this manual.
In no event will INLINE, Inc. be liable for direct, indirect, special, incidental, or consequential
damages resulting from any defect or omission in this manual, even if advised of the possibility of
such damages. The technical information contained herein regarding the DAT104 features and
specifications is subject to change without notice.
TMDS is a registered trademark of Silicon Image. All other trademarks and registered trademarks
are the property of their respective companies.
All Rights Reserved © Copyright 2000
© INLINE, Inc
♦
810 West Taft
♦
Orange, CA 92865
(800) 882-7117
♦
(714) 450-1800
♦
Fax (714) 450-1850
♦
www.inlineinc.com
