1
1. Safety
1.1 Safety Outline
•
Only trained individuals should attempt maintenance of this equipment. Failure to do
so could result in damage or personal injury.
•
Lethal voltages are present within this equipment when it is connected to the
mains electrical supply. Only trained and authorized personnel must carry out
the maintenance work. Observe all statutory electrical safety codes and
practices. Unless it is necessary to run the printer, disconnect the printer from
the mains electrical supply before removing the covers or attempting any
service or repair activity. Non-adherence to this warning can result in death or
personal injury.
•
The consumables used for the ink jet printer are combustible liquid. The consumables
used must comply with the instructions in the Material Safety Data Sheet (MSDS).
Meanwhile, the ink jet printer must also be subject to regular inspection and
maintenance to eliminate potential safety hazards.
1.2 Safety Measures
•
The ink jet printer must be installed in a safe, firm and stable way with good
grounding.
•
The ink jet printer must be installed at a ventilated place, and far from the heat
source, fire source and static electricity. Smoking near the ink jet printer is prohibited.
•
The covers of the containers for the printing ink, solvent and cleaning agent used for
the ink jet printer must be tightly closed, and they shall be stored in a ventilated
environment far from the ink jet printer.
•
The ink jet printer shall be maintained clean, because the consumable used may be
the combustible liquid. The printing ink may also be subject to combustion after being
dried.
•
A carbon dioxide dry powder fire extinguisher shall be arranged near the ink jet
printer.
1.3 Safety Considerations
•
The ink jet printer is non-contact ink-jet equipment, and is not applicable for all
occasions (such as the explosive environment). The user must comply with the safety
criterion and provide an appropriate working environment during use. Otherwise, the
consequences caused shall be assumed by the user.
•
The consumables of the original factory or permitted by the original factory (including
the printing ink, solvent, cleaning agent, maintenance products and so on) must be
used. The Material Safety Data Sheet (MSDS) must be ahered to and carefully read
and observed. Otherwise, the consequences caused shall be assumed by the user.
•
Those who may touch the consumables during operation shall wear the ink-resistant
gloves and protective glasses.
