37
5.3 Stop and clean the ink jet printer
5.3.1 Stop and clean
After equipment use, shut down according to the standard steps, and conduct
intervention if cleaning is necessary.
Standard steps for shutdown operation:
1) Press the
Stop Jet
this is normal STOP with internal solvent cleaning
2) During cleaning after shutdown, remove the printhead cover to observe whether
the printhead is dirty. In case of any dirt, fill the provided cleaning bottle with the
appropriate cleaning fluid for cleaning.
3) Only after the status bar has shown
STOPPED
, the power supply of the ink jet
printer can be turned off;
5.3.2 Shutdown and cleaning (power off during use)
If abnormal shutdown of the equipment is caused due to power off, ink-jet must be
restarted at the earliest time after power on. It shall be normally cleaned and shut
down after planned shutdown. Otherwise, some pipelines of the machine may be
blocked, causing permanent damage of the ink jet printer.
5.3.3 Shutdown and cleaning (long-term stop)
Due to the quick-dry characteristic of the ink of the ink jet printer, if long-term use stop
and storage are required, it is suggested to empty the ink and clean the system.
For details, see the sections of ink emptying and system cleaning.
