Injoy Motion Power Boat, Setup

Page: 25 / 49

©2012
Injoy Motion Corp.
24
EC003
Description The cockpit card can not be recognized.
Check steps Troubleshooting
1. Check out if the USB port of the IPC
motherboard is out of order.
Replace the USB connector to the
other USB port
.
2. Check out if the USB signal line
malfunctions.
Replace the USB signal line.
3. The cockpit card malfunctions. Replace the cockpit card .
EC004
Description The communication of the Cockpit Card USB is disrupted.
Check steps Troubleshooting
1. Check out if the USB signal line
malfunctions.
Change the USB signal line and
check out if the ground wire of the
motor is fixed on the plate.
2. The cockpit card malfunctions. Replace the cockpit card .
EC005
Descripti on Pedal calibration error
Check steps Troubleshooting
1. Use an electric meter to check out
if the pedal potentiometer exceeds
the dead zone.
(The resistance value varies from
maximum
to minimum or from
minimum to maximum when the pedal
is press.)
Make sure the pedal potentiometer
does not exceed the dead zone,
re-enter the game operation menu to
calibrate again.
2. Use an electric meter to check out
if the pedal potentiometer is
normal.
(The resistance value will increase or
decrease when the pedal is pressed.)
Change the potentiometer of the
pedal, and enter the game operation
menu to calibrate again.