Initio I/O HIGHWAY User Manual Download

Page: 48 / 62

initio

Installing the Initio driver in a new SCO UNIX system

Insert the SCO UNIX N1 boot disk into the floppy drive and turn on the system. At the

SCO UNIX boot prompt, type:

link < ENTER >

The system will ask you what packages you want linked to the system; type:

i91u

ENTER >

. The system at this point will boot into SCO UNIX. Please refer to the SCO

UNIX Documentation for additional information. When prompted by the installation,

insert the

INI-9XXXU/9XXXUW DRIVER DISK 2

diskette into your floppy drive; Press

ENTER >

Please refer to the SCO UNIX Documentation for additional information. You have

completed the installation of the SCO UNIX driver.

Adding the Initio driver to an existing SCO UNIX system

Insert the

INI-9XXXU/9XXXUW DRIVER DISK 2

diskette into your floppy drive.

Type:

installpkg

under the command prompt, <

ENTER

The system will ask you what packages you wish to install.

Type:

i91u < ENTER >

Change the directory and rebuild the UNIX kernel:

cd /etc/conf/cf.d < ENTER >

. /link_unix

< ENTER >

You have completed the link procedure for the Initio device driver. Exit and reboot

the system.

SCO Unix Driver Installation

Summary of Contents for I/O HIGHWAY































































Search results

Summary of Contents for I/O HIGHWAY

Reviews:

Related manuals for I/O HIGHWAY

Brands by name

Popular brands

Initio I/O HIGHWAY, User Manual

Search results

Summary of Contents for I/O HIGHWAY

Reviews:

Related manuals for I/O HIGHWAY

Brands by name

Popular brands